|
Post by JEFF on Dec 11, 2023 21:29:19 GMT
Thank you for your comments,Muckers. Onward and Sideways as always.
|
|
|
Post by JEFF on Dec 12, 2023 21:03:32 GMT
Step 3. A little drivetrain work.
It was pretty straight forward. I had to drill out a few holes to mount the bleeder lines. But other than that,It was pretty straight forward.
TTFN
ACW
|
|
|
Post by Boots on Dec 12, 2023 21:42:27 GMT
Very nice work Jeffers
|
|
|
Post by bwilt on Dec 12, 2023 22:25:02 GMT
Looks great!
|
|
|
Post by Ian H. on Dec 13, 2023 0:23:45 GMT
Those axles look sweet!
|
|
|
Post by Paul B on Dec 13, 2023 7:47:39 GMT
Detail is well worth the effort
|
|
|
Post by JEFF on Dec 13, 2023 12:50:14 GMT
Thank you all. Should have a bit more later in the day.🙂
|
|
|
Post by JEFF on Dec 14, 2023 22:02:16 GMT
Number 2 of 4 Differentials done.
Again,pretty straight forward. Some cleaning and a little drilling and all's good.
Looking at the instructions,I'm going to build all 4 Differentials, paint them and the Frame, then install them. Should work..........I hope.
TTFN
ACW
|
|
|
Post by Boots on Dec 14, 2023 22:30:46 GMT
Spiffingly grand job Jeff
|
|
|
Post by Armorguy on Dec 15, 2023 2:36:45 GMT
These differentials look marvelous Jeff!!!😎
|
|
|
Post by tommygunn on Dec 15, 2023 4:29:54 GMT
With metal parts too.
|
|
|
Post by Paul B on Dec 15, 2023 5:59:03 GMT
Sounds like a good plan to me Jeff
|
|
|
Post by Ian H. on Dec 15, 2023 12:18:03 GMT
Amazing work, Jeff!!!!!
|
|
|
Post by JEFF on Dec 15, 2023 14:04:49 GMT
Gents, your comments are well taken. Thanks.
Tommy, yes even metal. They function as lower Balljoints.
|
|
|
Post by JEFF on Dec 16, 2023 0:44:06 GMT
Differential 3 of 4.
No glitches.
Off to the final one.
As always
ACCW
|
|
|
Post by tommygunn on Dec 16, 2023 11:18:35 GMT
So cool.
|
|
|
Post by bwilt on Dec 16, 2023 13:36:22 GMT
There are a lot of pieces just for these axles, but great details. 👍
No wonder you had a 100 sprues coming out of that box 😄
|
|
|
Post by Ian H. on Dec 16, 2023 14:47:59 GMT
Now that's impressive!
|
|
|
Post by JEFF on Dec 16, 2023 15:46:30 GMT
I would have to say almost a kit in a kit. Thanks for checking in, Lads.
|
|
|
Post by Armorguy on Dec 16, 2023 15:50:17 GMT
Cool is the right word for it!
|
|