|
|
Post by Ian H. on Jan 10, 2020 23:21:46 GMT
Marco, beautiful work. The interiors on these MAXXPRO kits are fun to build and there's alot of room to detail.
Best wishes,
Ian
|
|
|
|
Post by PorcoRosso on Jan 11, 2020 7:12:51 GMT
Very nice detail Marco.
|
|
|
|
Post by JEFF on Jan 11, 2020 11:01:34 GMT
That's very nice, Marco. Well played so far, Man.  |
|
|
|
Post by Marco on Jan 13, 2020 11:20:31 GMT
|
|
|
|
Post by Snipersmudge on Jan 13, 2020 11:50:09 GMT
OMG!!! That's really taking the kit to another level Marco. Did you use CA to fix the etch or solder?  |
|
|
|
Post by Marco on Jan 13, 2020 12:47:02 GMT
OMG!!! That's really taking the kit to another level Marco. Did you use CA to fix the etch or solder? Hi Pete! I don't know how to solder the parts. I used VMS's FLEXY 5K CA contact adhesive for photo-etched SLOW type. It takes a bit more for set and give me some time to correct the position of the parts. It's a very good stuff. More info: Click hereHope it helps. Cheers mate! |
|
|
|
Post by Snipersmudge on Jan 13, 2020 13:05:20 GMT
Ah yes I use that as well it's very good stuff |
|
|
|
Post by Marco on Jan 13, 2020 13:18:05 GMT
Ah yes I use that as well it's very good stuff I don't know if it can help you with your truck, but they have some different types of CA, maybe one you can use a different one instead of solder. |
|
|
|
Post by Paul B on Jan 13, 2020 15:43:19 GMT
 Hot damn Marco  , that is some professional etching you have done there fella  |
|
|
|
Post by Marco on Jan 13, 2020 16:40:50 GMT
Cheers Mr. Global Admin!
|
|
|
|
Post by Boots on Jan 13, 2020 18:46:07 GMT
Downright fantastic etch work Marco  |
|
|
|
Post by Robbo on Jan 13, 2020 19:04:25 GMT
Superb start, this is going to look so good the more bits are added
|
|
|
|
Post by Marco on Jan 13, 2020 19:59:50 GMT
Cheers mates!
|
|
|
|
Post by Armorguy on Jan 13, 2020 20:56:21 GMT
That etchification looks just top quality!
And so fast too !!!
|
|
|
|
Post by Marco on Jan 14, 2020 11:29:52 GMT
Thanks a lot Guy!!!
|
|
|
|
Post by Armorguy on Jan 14, 2020 15:16:22 GMT
I keep coming back for the picks...stunning job.
|
|
|
|
Post by Paul B on Jan 14, 2020 15:29:26 GMT
So does I |
|
|
|
Post by Marco on Jan 14, 2020 16:32:01 GMT
Thank you so much guys! I think as I don't know how to work with white plastic, I started to bend tins... I must admit that in the past I'd very affraid about work with PE. But after buy the correct tools and glue, I started to like bend and glue PE (some parts are impossible to use for sure). |
|
|
|
Post by Paul B on Jan 14, 2020 17:18:08 GMT
Marco you could be right there ole chap  . But I still hate the stuff |
|
|
|
Post by Marco on Jan 14, 2020 17:53:09 GMT
Hate is a strong word my friend! But, as I said, some parrts are impossible to use, impossible to bend in the correct way ecc.  |
|
, that is some professional etching you have done there fella
.