|
|
Post by Snipersmudge on May 8, 2021 18:51:27 GMT
Neat work, she's a big bird for sure!
|
|
|
|
Post by tommygunn on May 9, 2021 8:24:52 GMT
Very productive.
|
|
|
|
Post by SteveM on May 9, 2021 17:04:52 GMT
I’ve taped the warped parts of my 1/144 Hurc so I hope annealing works!  Looking forward to seeing what you can do with this buddy  |
|
|
|
Post by armorguy on May 9, 2021 18:05:32 GMT
The extra white styrene comes in handy, well done.
|
|
|
|
Post by PorcoRosso on May 10, 2021 18:22:13 GMT
Many thanks Boots, Pete, Tommy, Steve and, Guy. Steve, I hope that helps straighten your Hurc up. Be careful using any heat. I once made an Italeri Hawk to rest on the top of my dashboard. When I left work on a hot day, I found the wings had melted in the sun.  I've added the rest of the lugs, dry fitted the bulkhead and cargo deck. The fuel tank halves have been glued together, also the wheels. The seats and control column are ready for a coat of primer. I shall carry on assembling as many parts as possible before I start painting anything.   |
|
|
|
Post by Boots on May 10, 2021 18:37:37 GMT
That should hold her nice and secure and aid alignment Joe |
|
|
|
Post by Paul B on May 11, 2021 3:48:07 GMT
Looking good Joe |
|
|
|
Post by Snipersmudge on May 11, 2021 5:37:59 GMT
Yeap those tabs should sort it out.
|
|
|
|
Post by PorcoRosso on May 11, 2021 12:49:30 GMT
|
|
|
|
Post by Paul B on May 11, 2021 13:24:04 GMT
I'll try to remember that one |
|
|
|
Post by armorguy on May 11, 2021 14:29:37 GMT
Sounds like you have a plan!
|
|
|
|
Post by Marco on May 11, 2021 20:55:05 GMT
Have a plan indeed! Nice way to put everything together!
|
|
|
|
Post by PorcoRosso on May 12, 2021 14:50:06 GMT
Thank you Paul, Guy and, Marco. Dropped a bit of a clanger. I checked the bulkhead positions and other bits, but didn't notice the end sections on the overhead panel. I've had to remove some of the lugs to allow it to fit. It also looks like it glues to the fuselage as well. Oh hum, that's muppetry on my part.   |
|
|
|
Post by Paul B on May 12, 2021 15:03:29 GMT
Joe I am sure you'll sort it fella . Happens to all of us mucker |
|
|
|
Post by Robbo on May 12, 2021 16:13:01 GMT
You've got your hands full with this one
|
|
|
|
Post by Boots on May 12, 2021 19:11:27 GMT
Oooh.......a teeny ooops moment , have every faith in ya Joe so go get at it |
|
|
|
Post by PorcoRosso on May 13, 2021 5:13:10 GMT
Cheers Paul, Robbo and Boots. I cut out the offending bits that I added, and it's just fine now. I'd like to point out, this was down to me not checking properly beforehand, nothing to do with the model. The kit itself is going together really well, despite my attempts to screw it up. |
|
|
|
Post by tommygunn on May 13, 2021 7:11:50 GMT
Well good recovery, mate.
|
|
|
|
Post by armorguy on May 13, 2021 12:24:22 GMT
You won't screw this up I'm sure.
|
|
|
|
Post by Snipersmudge on May 13, 2021 14:08:07 GMT
Grabbing this one by the short & curlys mate!
|
|
