|
|
Post by Ian H. on Jun 28, 2021 2:15:01 GMT
Nose gear well looks great, Tim!
|
|
Tim S
Glue Slinger
Posts: 684 
|
Post by Tim S on Jul 14, 2021 20:42:19 GMT
Been a while since I last posted, but now require a little assistance. The following picture for reference only. I have all of the items shown on this picture except for the missiles alongside the "Hindenburg" tanks. My question is what missiles are they, and does anyone know if I can get them in 1\32 as aftermarket items? I think the rest of the payload is covered,
Thanks in anticipation.
Tim
|
|
|
|
Post by Ian H. on Jul 14, 2021 23:12:29 GMT
Tim, those would be the mighty AIM-132 ASRAAM, a nasty, new generation air-to-air munition. Also, Eduard carries them in their Brassin line and Ozmod makes them as well.
|
|
Tim S
Glue Slinger
Posts: 684
|
Post by Tim S on Jul 15, 2021 15:49:41 GMT
Many thanks Ian, items on order, now I can move forward.
Tim
|
|
|
|
Post by SteveM on Jul 15, 2021 17:04:45 GMT
Them’s the ones  If you wanted to go for ‘armed to the teeth’ mode you could also add ALARM to the outer BOL wing launcher B) In fairness although this configuration could be carried , and was in tests, I don’t know if it ever was flown at squadron level. |
|
|
|
Post by Marco on Jul 16, 2021 11:49:24 GMT
I loved the work, but can't help with the ordnance.
|
|
Tim S
Glue Slinger
Posts: 684
|
Post by Tim S on Jul 26, 2021 20:33:02 GMT
Gents, Been a while since I posted anything on this one. After a lot of dry fitting and mucking about test fitting, I took a deep breath......    Cockpit area now glued, and very pleased with the outcome. Only dry fitted parts are the bang seats and canopy.
Fit was much better than I had anticipated, and vindicated all the test\dry fitting.
This next shot is for my good mate CeeBee,
It fits a treat buddy. Just need to get everything nice and square and trust the enginering. More soon. Tim
|
|
|
|
Post by Paul B on Jul 26, 2021 20:47:30 GMT
The canopy fitting is and always will be a squeaky bum thing Tim  . But this one looks bloody good indeed. I take Chris has given you some classy landing gear parts? |
|
|
|
Post by tommygunn on Jul 27, 2021 6:22:10 GMT
Exceptional
|
|
|
|
Post by SteveM on Jul 27, 2021 6:52:36 GMT
The fettling and fitting looks to have paid off nicely fella
|
|
|
|
Post by Marco on Jul 27, 2021 12:44:10 GMT
The office looks like a real one under the canopy!
|
|
|
|
Post by Snipersmudge on Jul 27, 2021 13:41:38 GMT
Very nice indeed.
|
|
Tim S
Glue Slinger
Posts: 684
|
Post by Tim S on Jul 27, 2021 19:34:43 GMT
Paul,
Not the landing gear, it's to do with the fit of the lower fuselage. The lack of a gap etc and the fact that it sits on a very small lip for fixing. Would look terrible if you cant get it all squared up etc.
Tim
|
|
wouter
Plastic connoissuer
Posts: 1,195
|
Post by wouter on Jul 28, 2021 16:34:29 GMT
agree with the gents here. That's one mighty fine office there!
|
|
|
|
Post by Ian H. on Jul 29, 2021 1:32:28 GMT
Tim, the front office looks outstanding and nice fit with the canopy hood.
|
|
Tim S
Glue Slinger
Posts: 684
|
Post by Tim S on Aug 8, 2021 18:40:19 GMT
Payload sorted, will have three Brimstones when finished.
Now to get on with the rest of the build. Having made 2 attempts at a post\update and lost both, hopefully the build will be more of a success..........  Tim
|
|
|
|
Post by Snipersmudge on Aug 8, 2021 18:42:14 GMT
Cool load out Tim.
|
|
|
|
Post by Paul B on Aug 8, 2021 19:34:37 GMT
Cool payload  |
|
|
|
Post by Marco on Aug 9, 2021 11:49:44 GMT
Looks fantastic from here!
|
|
|
|
Post by SteveM on Aug 9, 2021 19:38:22 GMT
Looks very businesslike Tim |
|
.
