|
|
Post by Ian H. on Aug 18, 2021 16:43:38 GMT
Paul, you would not disappointed, trust me. You want me to trust you.... a person who throws lasagna at walls  . I have read a lot about this kit, and after seeing your entry to this GB then yes, a high possibility it be that I may buy one  I haven't done that this week.....yet. |
|
|
|
Post by Paul B on Aug 18, 2021 16:56:44 GMT
You want me to trust you.... a person who throws lasagna at walls . I have read a lot about this kit, and after seeing your entry to this GB then yes, a high possibility it be that I may buy one I haven't done that this week.....yet. LMFAO  |
|
|
|
Post by armorguy on Aug 18, 2021 17:24:06 GMT
😅That should be the lasagna then lmao. |
|
|
|
Post by SteveM on Aug 18, 2021 18:02:50 GMT
I am wondering if a Spey version is in the works? It is designed with separate intakes and a separate under belly section so the Rolls Royce pieces could theoretically drop right in. It would be great if that happens but I think the whole rear fuse is a different shape Ian, it lost the area ruled displacement as the Spey was a shorter but fatter jet. In addition to the changes you mentioned the airframe was 6” wider and a bit deeper, plus it needed auxiliary intakes in the rear body. The UK Phantom was better at low level acceleration and had a higher low altitude speed but was much slower at normal heights and used more fuel due to the increase in drag caused by the new body shape. Do you think they can squeeze an ‘E’ out of it? There’s few changes in that variant Looking at your work and comments though you’ve sold me on the kit.., Xmas list #1 B) |
|
|
|
Post by Ian H. on Aug 20, 2021 2:15:28 GMT
I am wondering if a Spey version is in the works? It is designed with separate intakes and a separate under belly section so the Rolls Royce pieces could theoretically drop right in. It would be great if that happens but I think the whole rear fuse is a different shape Ian, it lost the area ruled displacement as the Spey was a shorter but fatter jet. In addition to the changes you mentioned the airframe was 6” wider and a bit deeper, plus it needed auxiliary intakes in the rear body. The UK Phantom was better at low level acceleration and had a higher low altitude speed but was much slower at normal heights and used more fuel due to the increase in drag caused by the new body shape. Do you think they can squeeze an ‘E’ out of it? There’s few changes in that variant Looking at your work and comments though you’ve sold me on the kit.., Xmas list #1 B) Would need new wings, cockpit, forward fuselage and nose section for any type of E/EJ/F/G. Readily adaptable for an N-Model and I am sure new wings, cockpit and cans are in the works for a USAF C/D and USN J/S. |
|
|
|
Post by PorcoRosso on Aug 20, 2021 16:21:37 GMT
Hello gentlemen, Sorry for my lack of progress with my build. Just as well Ian made great a start. Well done Ian. Your much more knowledgeable about the Phantom than I am. Your right about the quality of this kit. It's an absolute stunner! The detail looks very good indeed. I'm hoping to get underway over the weekend. But in the meantime, here's a few photos to show what a great kit this is. The decals look very good. They appear to be thinner than the previous decals that came with a Tamiya kit. I've found the canopy masks to fit nicely in the past when I've used them. I'm sure these will be just as good.      |
|
|
|
Post by Marco on Aug 20, 2021 16:27:54 GMT
Tamy quality for a quality builder! The kit looks fantastic!
|
|
|
|
Post by Paul B on Aug 20, 2021 16:55:23 GMT
It does look darned good to say the least  . Looking forward to your upcoming update Joe |
|
|
|
Post by Robbo on Aug 20, 2021 17:06:36 GMT
That detail is superb, did those masks come with the kit?
|
|
|
|
Post by PorcoRosso on Aug 20, 2021 19:33:36 GMT
That detail is superb, did those masks come with the kit? Thank you chaps. Ian, yes the masks come with the kit. |
|
|
|
Post by SteveM on Aug 20, 2021 19:37:36 GMT
It’s just busting with details, gotta get me one of those !
|
|
|
|
Post by Paul B on Aug 20, 2021 19:56:36 GMT
It’s just busting with details, gotta get me one of those ! Itchy fingers eh Steve  So are mine |
|
|
|
Post by Ian H. on Aug 21, 2021 0:19:22 GMT
You will love this kit, Joe. The rest of you slackers need some F-4Bs!
|
|
|
|
Post by PorcoRosso on Aug 22, 2021 11:36:32 GMT
|
|
|
|
Post by tommygunn on Aug 22, 2021 12:34:01 GMT
I can tell you are going to enjoy this one.
|
|
|
|
Post by Paul B on Aug 22, 2021 13:02:26 GMT
Joe is in the game now  |
|
|
|
Post by Ian H. on Aug 22, 2021 14:54:35 GMT
Excellent start, Joe. Yes, you will be amazed by the fit of the model.
|
|
|
|
Post by armorguy on Aug 22, 2021 20:11:52 GMT
More jet coolness.
|
|
|
|
Post by Marco on Aug 23, 2021 11:41:00 GMT
Great start Joe! Will be a jaw dropper!
|
|
|
|
Post by PorcoRosso on Aug 25, 2021 19:54:11 GMT
|
|
.
.
