|
Post by redzebra on Jan 19, 2022 15:09:40 GMT
Have had a couple people ask if I could produce some Russian 125mm propellant containers, turns out that they use empty ones, full of concrete or rubble as additional protection. Turned a couple tubes this morning (green tubes in the last photo), and tried adding a handle (may have to redo them though), also planning some that look a bit hollow, that can be laid on the ground, after 're arming' Ammo will be suitable for T-91 Twardy, T-64, T-72, T-80 & T-90   
|
|
|
Post by Paul B on Jan 19, 2022 15:33:17 GMT
As I saw that first picture, I thought you was doing something for the Hell Cannon  . After reading I realized what they are, they look good and something very useful for dioramas 
|
|
|
Post by redzebra on Jan 19, 2022 15:53:24 GMT
Cheers mate, top photo has sprue/ rod still on. I cast a rod of resin and turn it at slow speed, it works very well, as long as the heat doesn't build up too much
|
|
|
Post by Snipersmudge on Jan 19, 2022 16:10:46 GMT
Nice addition mate, very handy!
|
|
|
Post by Boots on Jan 26, 2022 18:57:28 GMT
They look dam cool Paul 
|
|
|
Post by redzebra on Jan 27, 2022 6:19:55 GMT
Thanks chaps, have remade them since the first versions, just need to add the tiny handle and ring pull... hopefully photo soon
|
|
|
Post by redzebra on Jan 27, 2022 12:36:14 GMT
Re made versions, including a few I cast off 'just in case' I screw up the tiny handle, which needs to fit within the 'U' channel on the lid (its about 0.5mm wide and the same in depth... The ones on the left still have the casting sprues on. 
|
|
|
Post by Paul B on Jan 27, 2022 13:06:12 GMT
Well done Paul 
|
|
|
Post by redzebra on Jan 27, 2022 13:39:39 GMT
Thanks mate, catches now added in magicsculpt, including a tiny little ring, about 0.5m in dia.... Hope it works...
|
|
|
Post by redzebra on Jan 27, 2022 14:44:17 GMT
Catches and ring pulls added, will see how it cures, may need to redo...  
|
|
|
Post by Boots on Jan 27, 2022 18:47:12 GMT
Holy feckin` moly thats some tiny detail work mucker  ..........gotta say `orsome` indeed 
|
|
|
Post by Ian H. on Jan 27, 2022 23:35:47 GMT
Beautifully done!
|
|
|
Post by redzebra on Jan 28, 2022 6:42:58 GMT
Thanks chaps :-) at about the limit of what I can do with this one.....the diameter of the tubes, ones 5mm the other 6mm
|
|
|
Post by redzebra on Jan 28, 2022 14:35:35 GMT
First out of the mould, (on the left) :-) 
|
|
|
Post by Boots on Jan 28, 2022 14:44:06 GMT
Pure craftsmanship........they look fantastic 
|
|
|
Post by redzebra on Jan 28, 2022 15:00:17 GMT
Thanks mate,was worried that the little rings may pull when taking them out of the mould but they were OK. :-)
|
|
|
Post by Snipersmudge on Jan 28, 2022 15:44:54 GMT
looks damn good1
|
|
|
Post by redzebra on Jan 28, 2022 15:58:06 GMT
Thanks chaps. Photo of them as additional armour 
|
|
|
Post by Boots on Jan 28, 2022 21:28:04 GMT
I do like them as additional armour Paul............Oooooh....now ya got ideas flowing again!!  Yurra bad influence with ya trucks and all!! 
|
|
|
Post by redzebra on Jan 29, 2022 6:19:07 GMT
Sorry Boots.......... you're not the first to say Im a bad influence :-)
|
|