|
|
Post by Paul B on Jan 18, 2021 15:51:10 GMT
Pete, Tommy, cheers chaps  . Nothing today, as I have just glossed the Fw 190. I should be back on here in a day or two. |
|
|
|
Post by Marco on Jan 19, 2021 12:03:06 GMT
Nice start, great work on those fuel cells.
|
|
|
|
Post by Paul B on Jan 19, 2021 12:06:20 GMT
Cheers Marco |
|
|
|
Post by dukemaddog on Jan 19, 2021 20:23:26 GMT
Beautiful work Paul! Personally I would have thought the tank explosions would have been a bit more 'catastrophic', but then again, I didn't look close enough at the actual damage pics to compare. Regardless, you've done brilliant work so far and will undoubtedly make this look 'smashing'!
|
|
|
|
Post by Paul B on Jan 24, 2021 14:46:46 GMT
Cheers Duke . You could right about the fuel cells, as the plastic is thin enough now I might be able to tear then open a bit more  . Well see later. I scratched the windscreen armour today, the kit part is way too thick to do any damage to. Shame to build something up, just to destroy it later  .   Although the weld-seam is a very prominent feature on this vehicle, I do believe mine is a tad too thick. I reckon I'll scrape it off and re-do that. |
|
|
|
Post by SteveM on Jan 24, 2021 15:17:20 GMT
There’s a lesson for me right there, I think oh well it’s a wreck and leave it but a proper modeller says I’ll add details and corrections to that Nice work Paul |
|
|
|
Post by Paul B on Jan 24, 2021 15:22:09 GMT
A proper modeler eh? You cracked me up with that one  . Cheers very much Steve mucker |
|
|
|
Post by Boots on Jan 24, 2021 15:42:31 GMT
Lovely bit `o` proper modelling |
|
|
|
Post by Paul B on Jan 24, 2021 15:53:10 GMT
Cheers Boots |
|
|
|
Post by Snipersmudge on Jan 24, 2021 17:48:35 GMT
Nice work old chap, nearly done then? LOL!
|
|
|
|
Post by PorcoRosso on Jan 24, 2021 20:22:58 GMT
Reather nice bit of scratch building going on there Paul.
|
|
|
|
Post by Ian H. on Jan 24, 2021 20:24:18 GMT
Looking good, Paul!
|
|
|
|
Post by dukemaddog on Jan 24, 2021 21:53:12 GMT
Superb work Paul! I am thrilled to see all this amazing work.
|
|
|
|
Post by Paul B on Jan 25, 2021 4:55:35 GMT
Pete, Joe, Ian, Duke, cheers kindly chaps . Might get a tad more done this evening, we'll see later |
|
|
|
Post by armorguy on Jan 25, 2021 6:19:38 GMT
Not the easiest part to scratch Paul and you just did it.
|
|
|
|
Post by Paul B on Jan 25, 2021 8:51:11 GMT
You're right there Guy . Cheers ole chap |
|
|
|
Post by Marco on Jan 25, 2021 12:32:03 GMT
Nice work Paul!
|
|
|
|
Post by Paul B on Jan 25, 2021 15:22:43 GMT
Thankee kindly Marco |
|
|
|
Post by Paul B on Jan 29, 2021 19:05:50 GMT
Today the dink in the windscreen armour was made, also a new engine cover and the burnt out dash board .    |
|
|
|
Post by Boots on Jan 29, 2021 19:42:40 GMT
Luvly bit of dinkage fella  |
|
.
. Well see later.
.
