Tim S
Glue Slinger

Posts: 740
|
Post by Tim S on Jun 1, 2021 17:01:08 GMT
After much searching I found a reasonably clear picture of the bang seat staps etc and went to work with the 3D decal straps. So far 11 applied and at least 6 more to go..... then repeat for the rear seat! I am not sure if this is 100% accurate but once done, and closed up, I think it should provide a reasonable representation of the real thing. Some pics for your delectation.      More soon, and as ever ACW. Tim
|
|
|
Post by Snipersmudge on Jun 1, 2021 17:32:39 GMT
They look very good indeed.
|
|
|
Post by Marco on Jun 1, 2021 17:43:31 GMT
Looks very good from here!
|
|
beano
Glue slinger 
Posts: 952
|
Post by beano on Jun 1, 2021 17:47:27 GMT
Niiccee......
|
|
Si B
Plastic connoissuer
 
Posts: 1,359
|
Post by Si B on Jun 1, 2021 18:19:19 GMT
They look very smart 
|
|
|
Post by SteveM on Jun 1, 2021 18:52:49 GMT
They look so much better than they did on the backing which is great news. One little thing and it’s just MHO, I don’t remember the padding standing quite so far off the seat on the Tonkas that were at Marham but pics are hard to find as you say. Here’s how I think they looked  for reference only.
|
|
|
Post by Ian H. on Jun 2, 2021 3:54:51 GMT
Bang seats looks excellent, Tim!
|
|
|
Post by tommygunn on Jun 2, 2021 4:23:01 GMT
Stunning job.
|
|
|
Post by Paul B on Jun 2, 2021 13:17:36 GMT
That is rather stunning Tim 
|
|
Tim S
Glue Slinger

Posts: 740
|
Post by Tim S on Jun 4, 2021 19:25:50 GMT
Pete, Marco, Beano, Si B, Ian, TG and Paul, Thanks for the comments, glad you like. SteveM, Have to agree with you, but it was so that I could keep things apart to build the layers. Hopefully the following will be more representative. Two more belts to go before the first seat is finished, and this is how it looks at the present.
    More soon and, as ever, ACW. Tim
|
|
|
Post by Paul B on Jun 4, 2021 19:30:52 GMT
That is bloody stunning Tim 
|
|
|
Post by SteveM on Jun 4, 2021 19:45:08 GMT
Now that’s brilliant work Tim, hats off to you buddy 
|
|
|
Post by Ian H. on Jun 5, 2021 3:19:06 GMT
The seat looks amazing. A model within a model!
|
|
Tim S
Glue Slinger

Posts: 740
|
Post by Tim S on Jun 5, 2021 8:31:55 GMT
Well thank you for the comments. Makes all the work worthwhile. In total there are 28 fiddly bits of 3D printed straps etc which try the patience of a saint given that no instruction or guidance is given. Having trawled around for ages, I managed to find this as a reference (for reference only)
and from that we have one seat completed and looking like this.
 Not to shabby and hopefully will give a good representation when all closed up in the fuselage.
Tim
|
|
|
Post by tommygunn on Jun 5, 2021 11:09:48 GMT
Not too shabby,indeed. Excellent bit of work.
|
|
|
Post by Ian H. on Jun 6, 2021 23:51:44 GMT
Looks spot on, Tim!
|
|
Tim S
Glue Slinger

Posts: 740
|
Post by Tim S on Jun 7, 2021 6:50:46 GMT
Quick look at how things should pan out when cockpit and canopy are fitted.  More soon. Tim
|
|
|
Post by Paul B on Jun 7, 2021 7:03:44 GMT
Looking good Tim, and you can see all that lovely work you have added too 
|
|
|
Post by Snipersmudge on Jun 7, 2021 7:08:59 GMT
Most excellent!
|
|
beano
Glue slinger 
Posts: 952
|
Post by beano on Jun 7, 2021 17:23:46 GMT
Nice office fella 👍
|
|