|
|
Post by nito74 on Oct 12, 2018 15:36:29 GMT
This will be part of a 3 scales Aircraft Building Tale  A 1:32 Special Hobby Tempest, 1950's Marking. A 1:48 KP Su-7 BM, A 1:72 Trumpeter Mig-29,
This thread will be for the Mig-29.
Box,
 
A will use those extras.
So what's with those extras ?
The BigED set has a mistake, wrong Masking set.
But the Resin Set has the same masking set...  Lucky Me...
 This is what we have in the PE & Brassin ( I still need to take some photos of the missile and wheel set )
        
I will take some photos of the sprues and markings soon.
|
|
|
|
Post by Paul B on Oct 12, 2018 15:48:17 GMT
OMG  , the Trumpeter kit is absolute beauty on its own  . If you add all that AM gear you're gonna have a total show stopper indeed  . This I am following for sure |
|
|
|
Post by SteveM on Oct 12, 2018 19:13:52 GMT
Now this is right up my street! Really keen to see this one develop |
|
|
|
Post by Boots on Oct 12, 2018 20:28:10 GMT
Wow........thats some work right there with all the extras on top of the Trumpy parts , nice one matey.....i`m in  |
|
|
|
Post by nito74 on Oct 13, 2018 23:04:47 GMT
Thanks fellas for the support. The only thing I need for this one is a Russian Tarmac for a base.  |
|
|
|
Post by SteveM on Oct 14, 2018 7:46:41 GMT
I've seen them on Ebay but they might be printed ones |
|
|
|
Post by Ian H. on Oct 14, 2018 19:58:41 GMT
This will be a great build. I will be watching!!
Regards,
Ian
|
|
|
|
Post by JEFF on Oct 15, 2018 21:17:49 GMT
I'm in too, please.
|
|
|
|
Post by nito74 on Oct 16, 2018 23:24:42 GMT
Ok, here we go...
With sub-assemblies from the PE set and resin set, I will be jumping between puddles of plastic, resin and metal parts...
      
So I'll be working with the front landing gear / wheels.
Plastic parts :
    |
|
|
|
Post by Boots on Oct 17, 2018 17:13:56 GMT
Good luck fella  |
|
|
|
Post by SteveM on Oct 17, 2018 18:12:40 GMT
Looks very complicated from here fella, must be a few hours work right there. I’m not convinced that flat etch will work well as piping but I’m hoping you can show me the way |
|
|
|
Post by JEFF on Oct 17, 2018 21:41:24 GMT
This is going to be a very interesting build. |
|
|
|
Post by nito74 on Oct 18, 2018 9:02:19 GMT
Looks very complicated from here fella, must be a few hours work right there. I’m not convinced that flat etch will work well as piping but I’m hoping you can show me the way From here too...
I might try some thin brass wire instead. But it's such a small scale, well... let's see how it goes..  |
|
|
|
Post by Paul B on Oct 18, 2018 10:54:21 GMT
We're orfe , and a grand start you have there too . |
|
|
|
Post by SteveM on Oct 18, 2018 15:23:01 GMT
Looks very complicated from here fella, must be a few hours work right there. I’m not convinced that flat etch will work well as piping but I’m hoping you can show me the way From here too...
I might try some thin brass wire instead. But it's such a small scale, well... let's see how it goes.. maybe primer and paint will round off the edges? Anyway I’ll be watching with interest |
|
|
|
Post by nito74 on Oct 19, 2018 11:25:28 GMT
That might work Steve !! |
|
|
|
Post by nito74 on Oct 19, 2018 11:34:34 GMT
|
|
|
|
Post by Paul B on Oct 19, 2018 15:19:53 GMT
OMG , I wanna do that too . |
|
|
|
Post by SteveM on Oct 27, 2018 7:33:40 GMT
How much and where do I sign! |
|
|
|
Post by Boots on Oct 27, 2018 18:45:09 GMT
I certainly wouldn`t eat beforehand   |
|
Lucky Me...
, the Trumpeter kit is absolute beauty on its own 
.
.
